How To Remove A Pending System Repair
SFC scans are useful in finding issues with the Difficult Drive and resolving them. However, at times while trying to perform an SFC scan, we get the post-obit error:
In that location is a organization repair pending which requires reboot to complete. Restart Windows and run SFC scan again.
Equally the fault specifies, restart the system and the fault would be gone. Even so, it doesn't always happen.
Cause
Some control which should have been executed remain stuck and interfere with the SFC browse process. Merely restarting the organization doesn't execute them and this causes the issue.
Try the following steps to resolve the event:
Solution ane] Update Windows
At times, a deferred Windows update might crusade this issue. You could try updating Windows to resolve this issue.
Solution 2] Update drivers
Updating the drivers (especially the graphic drivers) might help with the problem. Here's the procedure to update drivers.
Solution 3] Using Command Prompt
The reason the mistake bulletin is recurring is that a procedure is stuck in awaiting. We could try to delete the folder concerned with the process through Control Prompt.
1] Press Win + R to open up the Run window. Type the command cmd and press Enter to open up the Control prompt window.
2] Type following command and press Enter.
del X:\windows\winsxs\pending.xml
Where X: is the driver letter for the bulldoze we are deleting the binder from.
iii] Repeat this command for all the drives on the system.
4] Once these command take been executed, endeavour this modified command for SFC scan:
sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\Windows
Solution iv] Try fixing issue in recovery mode
1] As soon equally you restart the organisation, keep pressing F8 to boot Windows 10 in recovery fashion.
2] Get to Troubleshoot >> Advanced Options >> Command Prompt.
3] Blazon the following commands in the Command Prompt window:
bcdboot C:\Windows bootrec /FixMBR bootrec /FixBoot
4] Restart your system and check if you are able to perform the SFC browse now.
Solution v] Registry level prepare
1] Press Win + R to open the Run window. Type the control regedit and press Enter to open up the Registry Editor window.
2] Navigate to the post-obit path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion
3] On the right-pane, notice the key RebootPending. Right-click on it and select Permissions.
4] Find your name in the usernames section.
5] Check the Total Command checkbox in the permissions section and Apply the settings.
vi] Restart the system and try SFC browse now.
Hope it helps!
Source: https://thegeekpage.com/fix-there-is-a-system-repair-pending-which-requires-reboot-to-complete-in-windows-10/
Posted by: martinrivinquister52.blogspot.com
0 Response to "How To Remove A Pending System Repair"
Post a Comment